26|
Connecting an external controller with an X/Y pad to
control sound parameters
By connecting an external controller with an X/Y pad (for example, the KORG
nanoPAD2 or padKONTROL) you can control specific parameters of the
sound, like Brightness or Resonance, or both at the same time.
Configure the external controller
1 Program the external controller to send data on the MIDI channel corre-
sponding to the Sound you wish to control. For example, use MIDI channel 1,
usually the default.
With the nanoPAD2 and devices of the same series, you can choose a trans-
mission MIDI channel by using the KORG KONTROL Editor software, that you
can freely download from our web site.
In the editor, press the Global button to open the Global dialog, and go to
the X-Y Pad page.
In the following image, you can see how the nanoPAD2’s Global channel has
been set to MIDI channel 1.
To Next Page
Loading...
Need help?
General
