456
Assembling the ST-SV1 BK stand
Precautions after assembly
Use caution when transporting the instrument. Remove the
instrument from its stand, and transport them separately. Please
use the included loop fastener tapes to secure the stand legs dur-
ing transport and avoid any damage. After transportation, refer
to these instructions and re-assemble the instrument and stand.
Loosening of the screws. After assembly, the various screws
and bolts of the stand may loosen as time goes by, causing the
stand to wobble. If this occurs, re-tighten the screws.
Disassembly. If you need to packup the instrument, reverse the
assembly order by which the instrument was attached to the
stand and the stand was assembled. For improved protection, we
suggest you also replace the protective sheet (see step 2).
Pa3XLe User Manual v100 (English).book Page 456 Thursday, May 29, 2014 5:42 PM
To Next Page
Loading...
