8|
4 Browse though the drives and folders, and select the SET folder to be used
as the Direct set of banks.
5 Touch the Select button to confirm.
Please note that you can only have a single Direct folder for all the types of
data.
6 If you select a folder from a different Pa-Series instrument, you are asked if
you want to convert the data to a format that Pa700 can read. If you confirm,
you are prompted to choose a name and position for the new SET folder. (If
you touch Cancel, no Direct folder is selected).
7 When done, go to a Select window, and see how the Direct type of data can
be selected from the tabs on top of the list.
The Direct SongBook Entries and Set Lists will be automatically added to the
internal Entries and Set Lists.
To Next Page
Loading...
