4–2c: Level Control
Velocity [–99…+99]
Specifies the depth and direction of the effect that velocity will have on the level of the amp EG.
4–2d: Level Modulation
AMS (Alternate Modulation Source) [OFF…MIDI (CC#83)]
Selects a modulation source (
☞
page 64 of this manual) that will control the level of the Amp EG.
Intensity (EG Level AMS Intensity) [–99…+99]
Specifies the depth and direction of the effect that “AMS” will have on the level of the Amp EG.
4–2e: Time Modulation
AMS.1 (Alternate Modulation Source 1) [OFF…MIDI (CC#83)]
Selects a modulation source 1 (
☞
page 64 of this manual) that will control the Amp EG times.
Intensity (EG Time AMS.1 Intensity) [–99…+99]
Specifies the depth and direction of the effect that “AMS.1” will have on the Amp EG times.
AMS.2 (Alternate Modulation Source 2) [OFF…MIDI (CC#83)]
Selects a modulation source 2 (
☞
page 64 of this manual) that will control the Amp EG times.
At (Attack Time AMS.2 Intensity) [–99…+99]
Dc (Decay Time AMS.2 Intensity) [–99…+99]
Sl (Slope Time AMS.2 Intensity) [–99…+99]
Rl (Release Time AMS.2 Intensity) [–99…+99]
Specifies the depth and direction of the effect that “AMS.2” will have on each EG time.
4-2: Amp EG
When " Velocity" is set to a positive (+) value
Note-on
Note-off
Note-on
Note-off
Note-on
Note-off
Settings of the Amp EG
Softly played notes
Strongly played notes
When the various EG times are set to negative (–) values
Note-on
Note-off
Note-on
Note-off
Note-on
Note-off
Settings of the Amp EG
Softly played notes Strongly played notes
To Next Page
Loading...
Need help?
General
