Korg TMR-50 - Recording and Playback Basics; Playing Back Recorded Performance

12
The center indicator of the tuning guide will
blink in red. In addition, the track number
and REC icon will blink on the display,
and the track number will change to “0”.
REC icon
Blinking red
With the TMR-50, the recording level is
automatically adjusted. It is unnecessary
to specify seings in advance.
4. Press the PLAY/STOP button or the
REC buon to start recording. Play your
instrument.
While recording, the center indicator of the
tuning guide will light up in red.
Lite red
5. When the performance is complete, press
the PLAY/STOP buon to stop recording.
Playing back the recorded performance
Next, let’s play back the data for the recorded
performance.
1. Aer recording was stopped, press the
PLAY/STOP buon.
The performance that was recorded is
played back.
The center indicator of the tuning guide
will blink in green, and the PLAY icon will
appear on the display.