Korg TMR-50 User Manual

21
The tap tempo can also be input while
the metronome is in use.
4. Play according to the tempo.
5. To stop the metronome, press the START/
STOP buon.
Using the tuner and metronome
simultaneously
The TMR-50 lets you use the tuner and
metronome simultaneously.
For more details on tuner and metronome
operation, please refer to the “Using the
tuner” and “Using the metronome” section.
Using the tuner and metronome
simultaneously
For example, if you’re playing along with the
metronome and notice that your instrument
is not tuned correctly, you can leave the
metronome running while you tune.
Proceed as follows.
1. Press the METRONOME ON buon.
2. Press the START/STOP buon to start
the metronome.
If necessary, specify the tempo and time
signature etc.
To set the tempo: TEMPO p, q buons
or TAP TEMPO buon
To set the time signature: BEAT p, q buons
When using the tuner and metronome
simultaneously, you can’t select “triplets,”
“triplets without the center beat,”
“quadruplets” or “quadruplets without
the center beats” as the time signature.
3. Press the TUNER ON buon to enter
Meter mode.
The display will show the tuning meter.
The tempo of the metronome tempo
is indicated by the blinking of the TAP
TEMPO buon.

Korg TMR-50 Specifications

General

Brand	Korg
Model	TMR-50
Category	Recording Equipment
Language	English