Korg TMR-50 - Page 30

30
metronome will sound. Regardless of
whether or not the metronome sounds,
the metronome is running.
3. Specify the metronome tempo, beats and
other seings.
For more details on the seing procedures,
please refer to the “Using the metronome”
section on page 19.
Note: When the recorder and metronome
are being used together, the available
range for the metronome’s BEAT seing
is 0 through 9.
4. Press the buon to select the precount.
The precount switches each time the buon
is pressed. The available precount seings
will differ depending on the selected
BEAT seing.
BEAT Precount
0
...n-4n-8n-2n-1n-4...
1
...n-4n-8n-2n-1n-4...
2
...n-4n-8n-2n-1n-4...
3
...n-3n-6n-3...
4
...n-4n-8n-2n-1n-4...
5
...n-5n-10n-5...
6
...n-6n-12n-6...
7
...n-7n-14n-7...
8
...n-8n-16n-8...
9
...n-9n-18n-9...9
5. Press the PLAY/STOP button or the
REC buon.
Aer the precount, recording will start.
During the precount, the center indicator
of the tuning guide will light up in orange.
To cancel recording, press the buon.
Note: When the recorder and metronome
are being used simultaneously, recording