Korg X3 - 6. How to Disassemble; 1. Remove the Bottom Plate; 2. Remove the Main board (KLM-1645); 3. Remove the Analog board (KLM-1648)

6. HOW TO DISASSEMBLY
II.
Remove the BottonTPlatel
1)
Remove al!
the
screws on the bottom plate and
carefully lift the plate.
CBT B
BZMC 3X8] X4
CBT B
BZ«C
4X10] X18
g. Remove
tl^e Wain
board(KLIir-T645)
1)
Unplug all the
harnesses on the KLM-1645
board.
2)
Remove 3pcs. of the
screws on the side
of the keyboard.
CBT B
ZMC 3X8]
X3
3)
Remove 4pcs. of
the screws on the back
side
and remove the KLM-1645
board.
CBT B
BZMC 3X8]
X4
B. Remove the Analog
board(KLM-!6485
1)
Unplug all the
harnesses on the
KLM-1848 board.
2)
Remove 2pcs. of
the
screws on the side
of the
keyboard.
CBT B
ZMC
3X8] X2
3)
Remove 4pcs. of
the screws on
the back
side
and
remove the KLM-1648 board.
CBT B
BZMC
3X83
X4
14.
Remove the
Power Supply Unit
Assemblyl
1)
Unplug
3pcs. of the
harnesses
on the power
supply
board.
2)
Remove 4pcs- of
the screws
on the power
supply
unit chassis.
CBT B
ZMC
3X8]
X4
3)
Remove
4pcs. of the
screws
on
the back side
and
remove the power
supply
unit assembly
CBT B
BZMC
3X8] X4
13