Korg X3 User Manual

7.
DIAGNOSTIC
TEST
The X3
has a test
aode
for
checking
nunerous
functions,
ffhen the test
node
is
activated, the X3
internal
data is
initialized.
Hence,
if the X3 contains
any
necessary
data,
save
this data
on a floppy
disk
beforehand. The figure
below shows the
equipment
and settings
required for carrying
out
tests.
t
<Settings for
Tests>
MONITOR
OSCILLO-
SPEAKER
SCOPE
The
RAM card
used
in the
test
mode must be
formatted
in
advance,
and the
protect
switch
must be
OFF.
Use XSC'801
as
the PCM
card.
16

Korg X3 Specifications

General

Polyphony	32 voices
Multitimbral	16 parts
Presets	200 programs, 200 combinations
User Patches	100 programs, 100 combinations
MIDI	In, Out, Thru
Weight	10.5 kg
Type	Workstation
Keyboard	61 keys
Sequencer	16-track
Display	LCD
Outputs	Stereo
Memory	Internal