Korg X3 - Method of Initializing RAM Data

-
Insert a
blank
floppy
disk into the floppy disk
drive and press
CENTER] to start testing
the floppy disk drive.
(It takes about four ninutes to conplete this
test.)
When the result is normal, ’Completed* is displayed on the LCD.
When an error is found, the LCD blinks and an error
message
is
displayed.
*
<Nethod of
initializing RAN data>
To initialize the RAM
data,
turn on
the power while holding
down
the CENTER]
and
[]
keys.
25