Kracht GmbH Maintenance | 9
88046020002 39 / 46
9.2 Maintenance work
TIPP
Checking and documentation of the operating data
Regular checking and documentation of all operating data helps to detect faults at an early
stage.
– Perform maintenance according to specification.
– Replace defective and worn components
– If required, request spare parts lists and assembly drawings from the manufacturer.
– Document the type and extent of the maintenance work..
– Dispose of packing material and used parts in accordance with the local stipulations.
NOTICE
Protective equipment and notices
After maintenance and/or repair, reattach all protective devices and notices removed in the
process to their original position.
9.2.1 Cleaning - Desposits in the measuring device
a) Cleaning of the measuring element is always done by the manufacturer.
To Next Page
Loading...
Need help?
General
