Kracht GmbH Safety | 2
88046020002 7 / 46
2.3 Basic safety instructions
NOTICE
Basic safety instructions
Non-compliance can lead to hazards for people and the unit.
a) Follow existing regulations for accident prevention and safety at work as well as the in-
ternal regulations of the operating company.
b) Ensure the greatest possible cleanliness.
c) Wear suitable personal protective equipment.
d) Do not remove type plates or other information or make them illegible or unrecognis-
able.
e) Do not make any technical modifications.
f) Comply with maintenance intervals.
g) Only use spare parts approved by the manufacturer.
2.4 Fundamental hazards
DANGER
Hazardous fluids
Danger to life when handling hazardous fluids.
a) Comply with the safety data sheets and regulations on handling the hazardous fluids.
b) Collect and dispose of hazardous fluids so that no hazard is created for persons or the
environment.
DANGER
Rotating parts!
Danger of death due to body parts, hair or clothing getting trapped or entangled.
a) Before all work, ensure that existing drives are voltage-free and pressure-free.
b) Securely prevent restarting during all work.
DANGER
Exposed electrical components
Risk of fatal electric shock.
a) Adhere to the special safety regulations for all work on electrical systems.
Switch off electrical systems and secure them against being switched on again.
b) Work on electrical systems may only be carried out by a qualified electrician.
c) Use only connection lines that are resistant to ambient influences and media.
To Next Page
Loading...
Need help?
General
