2 | Safety Kracht GmbH
6 / 46 88046020002
2 Safety
2.1 Intended use
1. The device has been designed for operation with fluid.
Dry operation is not permitted.
2. The product may only be operated when completely filled.
3. The fluid must be compatible with the materials used in the product. Chemical expertise
is required for that. Be careful with ethylene oxide or other catalytically or exothermically
reacting or self-decomposing substances. Please consult the manufacturer in cases of
doubt.
4. The product may only be used in normal industrial atmospheres.
If there are any aggressive substances in the air, always consult the manufacturer.
5. The product may only be operated in compliance with these operating instructions and
the applicable documents.
Deviating operating conditions require the express approval of the manufacturer.
6. Use of the product for purposes other than those for which it is intended invalidates any
warranty.
2.2 Personnel qualification and training
The personnel designated to assemble, operate and service the device must be properly
qualified.
This can be through training or specific instruction.
Personnel must be familiar with the contents of this operating instructions.
NOTICE
Read the operating instructions thoroughly before use.
To Next Page
Loading...
Need help?
General
