Mounting KC-Virtual Brain1
This section provides instructions for mounting KC-Virtual Brain1. Before installing, verify that
the environment is within the recommended range:
l
Operation temperature – 0° to 40°C (32 to 104°F).
l
Storage temperature – -40° to +70°C (-40 to +158°F).
l
Humidity – 10% to 90%, RHL non-condensing.
Caution:
l
Mount KC-Virtual Brain1 before connecting any cables or power.
Warning:
l
Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible for the device.
l
Avoid uneven mechanical loading.
l
Appropriate consideration of equipment nameplate ratings should be used for
avoiding overloading of the circuits.
l
Reliable earthing of rack-mounted equipment should be maintained.
To mount KC-Virtual Brain1 on a rack:
Mount the unit in a rack using the recommended rack adapter
(see http://www.kramerav.com/product/KC-Virtual Brain1).
You can also install KC-Virtual Brain1 using the following method:
n
Place the device on a flat surface.
Kramer Electronics Ltd.
KC-Virtual Brain1 - Mounting KC-Virtual Brain1 6
To Next Page
Loading...
