PT-871/2-KIT, PT-871/2xr-KIT, WP-871xr, WP-872xr, PT-871xr, PT-872xr – Technical Specifications
Technical Specifications
PT-871/2-KIT
On a female HDMI connector
On a female RJ-45 connector
On a female RJ-45 connector
On a female HDMI connector
18Gbps (6Gbps per graphic channel)
3840x2160@60Hz (4:4:4) 24bpp
HDR10 as specified in HDMI 2.0, HDCP 2.2
We recommend that you use Kramer shielded cables to achieve
optimum extension ranges.
40m (130ft) at 4K60 (4:4:4 or 4:2:0) or full HD
(1080p @60Hz 36bpp)
Low-level compression is applied to line-
transmitted signals of above 1080p resolution
0° to +40°C (32° to 104°F)
-40° to +70°C (-40° to 158°F)
10% to 90%, RHL non-condensing
6.22cm x 5.18cm x 2.44cm (2.45" x 2.04" x 0.96"
) W, D, H
15.70cm x 12.00cm x 8.70cm (6.18" x 4.72" x
3.43" ) W, D, H
1 Power adapter (Note: When purchasing PT-
871/2-KIT, only one power adapter is supplied for
both units.)
Specifications are subject to change without notice at www.kramerav.com