KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
4
3.3 About the TP-114
Your Kramer TOOLS TP-114 1:4 XGA / HD DA /CAT5 Transmitter:
Receives a computer graphics
1
/ HD
2
signal and transmits it over four
CAT5 cables to appropriate receivers
3
Has a resolution of up to UXGA, and a transmission range of more than
300 ft. (more than 100 meters)
Can change the polarity of decoding H and V Sync for video
Includes the power connect feature (see section 3.1)
Is 12VDC fed
3.4 Recommendations for Achieving the Best Performance
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances that may
adversely influence signal quality, and positioning your TP-114 away from
moisture, excessive sunlight and dust
1 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an HD15 connector
having a resolution from VGA up to UXGA
2 The TP-114 accepts high definition resolutions: 480p, 576p, 720p, 1080i, and 1080p
3 Note that the CAT5 connectors exclude audio
To Next Page
Loading...
Need help?
General
