Kramer VM-114H2C - 5 Using the VM-114 H2 C; 5.1 Connecting the VM-114 H2 C

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-114H2C
8
5 Using the VM-114H2C
This section describes how to:
• Connect the VM-114H2C (see Section
5.1)
• Use the EDID SELECT button (see Section
5.2).
5.1 Connecting the VM-114H2C
Figure 3: Connecting the VM-114H2C
To connect
1
the VM-114H2C as illustrated
2
Figure 3 in the example in :
1. Connect the HDMI source (for example, a DVD player) to the IN 1 (HDMI)
connector.
1 Switch off the power on each device before connecting it to your VM-114H2C. After connecting your VM-114H2C, switch on its
power and then switch on the power on each device
2 The power adapter is not shown