Kramer VM-114H2C - Table of Contents

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 2
3 Overview 3
3.1 About HDMI 4
3.2 Using Shielded Twisted Pair Cable 4
3.3 About the Power Connect™ Feature 5
3.4 Defining EDID 5
3.5 Recommendations for Best Performance 5
4 Defining the VM-114H2C 6
5 Using the VM-114H2C 8
5.1 Connecting the VM-114H2C 8
5.2 Acquiring the EDID 9
5.2.1 Disabling/Enabling Deep Color Support 10
5.3 Connecting to the VM-114H2C via RS-232 10
5.4 RS-232 and IR Control and Pass-through 10
5.4.1 RS-232 Control and Pass-through Using the VM-114H2C 11
5.4.2 Local IR Control and IR Pass-through Using the VM-114H2C 11
6 Wiring the Twisted Pair RJ-45 Connectors 15
7 Technical Specifications 16
8 Default Communication Parameters 16
9 Default EDID 17
10 Kramer Protocol 2000 18
Figures
Figure 1: VM-114H2C Front Panel 6
Figure 2: VM-114H2C Rear Panel 7
Figure 3: Connecting the VM-114H2C 8
Figure 4: VM-114H2C RS-232 Control and Pass-through 11
Figure 5: VM-114H2C IR Control and Pass-through Example One 12
Figure 6: VM-114H2C IR Control and Pass-through Example Two 13
Figure 7: VM-114H2C IR Control and Pass-through Example Three 14
Figure 8: CAT 5 Pinout 15