Kramer VM-114H2C - Figure 7: VM-114 H2 C IR Control and Pass-Through Example Three

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-114H2C
14
5.4.2.3 IR Local Control and Pass-through Example Three
The configuration is shown in Figure 7.
Figure 7: VM-114H2C IR Control and Pass-through Example Three
The first DVD player (player 1) is connected to the TP-573 transmitter via an IR
emitter.
The second DVD player (player 2) is connected to the VM-114H2C via an IR
emitter.
An IR sensor is connected to the TP-574 receiver.
Both the TP-573 and the TP-574 are connected to the VM-114H2C via TP
cabling.
To control DVD player 1, point the DVD player 1 IR remote control at the TP-574
IR sensor. To control DVD player 2, point the DVD player 2 IR remote control at
the TP-574 IR sensor. To control the VM-114H2C, point the Kramer remote
control at the VM-114H2C IR sensor.