KRAMER ELECTRONICS LTD.
9
5.1 Getting to Know Your Switcher
Most front/rear panel features of the switchers described in this manual are very similar. Therefore, only the VS-
1211 and the VS-1201xl are described and they represent the rest of the switchers. The main difference is that
the “11” group has snap fit terminal block connectors for balanced audio and the “01xl” group has RCA
connectors for unbalanced audio.
Front/rear panel features of the VS-1211 and VS-1201xl/VS-1001xlm switchers are described in Figure 2, Table
and Table .
Figure 2: VS-1011xlm/VS-1201xl Front/Rear Panel Features
To Next Page
Loading...
Need help?
General
