3 Overview
The VS-211H is a high-performance automatic standby switcher for HDMI
1.3 video signals. The VS-211H automatically switches to the secondary
input whenever the primary video signal is interrupted. If the primary signal
reappears, the unit automatically switches back to the primary input.
In addition, the VS-211H features:
• A maximum data rate of up to 2.25Gbps
• HDTV compatibility
• HDCP and HDMI compliance
• A DEFAULT INPUT switch for selecting the default HDMI master
source signal
• Contact closure remote control for forced operation
• Active switching
To achieve the best performance:
• Use only good quality connection cables
1
• Avoid interference from neighboring electrical appliances that
may adversely influence signal quality and position your Kramer
VS-211H away from moisture, excessive sunlight and dust
to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit
2
.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com
2 For example, part number 2535-052002
To Next Page
Loading...
