Kreg Deck Jig User Manual

OWNER’S MANUAL
We’re here to help.
We want you to have an exceptional project building experience.
If you have questions or need support, please get in touch.
1-800-447-8638 | technicalsupport@kregtool.com
Tell us about your experience.
Your opinion counts. And we’re always looking for ways to improve.
Share your feedback so we can keep growing and innovating for you.
www.kregtool.com/feedback
WARNING Every user must read and follow instructions and safety precautions in this manual.
Failure to do so could result in serious injury. Save manual for future reference.
English 2
French 17
Spanish 33
Deck Jig™ Concealed
Fastening System
Manual applies to Item # KJDECKSYS20

Kreg Deck Jig Specifications

General

Brand	Kreg
Model	Deck Jig
Category	Racks & Stands
Language	English

Summary

Safety Precautions

Pre-Assembly

Recommended Tools/Materials

Jig Assembly

Attach the Drill Guides to the Deck Jig

Step-by-step instructions for attaching drill guides to the main jig unit.

Depth Collar Setup

Set the Depth Collar on the Drill Bit

Guides on setting the depth collar for the drill bit based on decking type.

Set the Depth Collar on the Driver Bit

Instructions for setting the depth collar for the driver bit for proper screw depth.

Operation

Before You Begin

Drill a Pocket Hole and Pilot Hole

Detailed steps for drilling pilot holes using the deck jig and drill bit.

Drive a Screw

Instructions for driving screws into the pre-drilled holes using the deck jig.

Hole Placement

General guidelines

Drilling Stair Treads

Using Spacer Rings

Using Spacer Rings for Consistent Spacing