Kreg Face Clamps™
Item# KHC-PREMIUM (75mm reach),
Item# KHC-LARGE (150mm reach),
Item# KHC-XLARGE (250mm reach)
With a choice of 75mm-, 150mm-, and
250mm reach, there’s a Kreg Face Clamp™ that meets your needs.
HD Drill Bit
ITEM# DB210-HDB
Replacement drill bit for the Foreman DB210-EUR
Kreg Jig
®
HD Drill Guide and Drill Bit
ITEM# DB210-HDBB
Designed for use with “2-by” material, this
heavy-duty system drill holes for #14 x 2
1
⁄2"
pocket screws.
Optional Accessories
Optional Accessories
Because accessories, other than those offered by Kreg, have not been tested with this product, use of such accessories
with this tool could be hazardous. To reduce the risk of injury, only Kreg recommended accessories should be used with
this product. Recommended accessories for use with your tool are available at extra cost from your distributor or local service center. The
following accessories are available for the Kreg Foreman DB210-EUR from your Kreg dealer or online at www.kregjig.com.
Micro Pocket™ Drill Guide and Drill Bit
ITEM# DB210-MBB
With a hole diameter 25% smaller than our
standard pocket hole, the Micro Pocket™ Drill
Guide lets you create compact pocket holes in
thin stock, and tight repair applications.
!
WARNING
www.kregtool.com • 1.800.447.8638
Kreg Tool Company, 201 Campus Drive, Huxley, IA 50124 U.S.A.
To Previous Page
Loading...
