Need help?Do you have a question about the Kreg Jig R3 and is the answer not in the manual?
General| Material | Glass-filled nylon |
|---|---|
| Drill Guide Material | Hardened steel |
| Pocket Hole Sizes | Standard |
| Adjustable Depth Setting | Yes |
| Drill bit diameter | 3/8" |
| Drill Guide Spacings | 3/4", 1-1/4" |
| Compatible Material Thickness | 1/2" to 1-1/2" |
| Includes | Stepped drill bit, depth collar, Allen wrench |
| Screw Sizes | #6, #7, #8, #9 |
To Next Page
