Kreg KPHJ920 User Manual

English 2
French 13
Spanish 25
OWNER’S MANUAL
We’re here to help.
We want you to have an exceptional project building experience.
If you have questions or need support, please get in touch.
1-800-447-8638 | technicalsupport@kregtool.com
Tell us about your experience.
Your opinion counts. And we’re always looking for ways to improve.
Share your feedback so we can keep growing and innovating for you.
www.kregtool.com/feedback
WARNING Every user must read and follow instructions and safety precautions in this manual.
Failure to do so could result in serious injury. Save manual for future reference.
Pocket-Hole XL Jig
Manual applies to Item # KPHJ920

Kreg KPHJ920 Specifications

General

Brand	Kreg
Model	KPHJ920
Category	Power Tool
Language	English

Summary

Safety Precautions

Pre-Assembly and Product Description

Product Description

Lists and illustrates all parts included in the Kreg Pocket-Hole XL Jig package for user identification.

Assembly Instructions

Set the Stop Collar

Guides on measuring workpiece and setting the stop collar on the drill bit using the hex wrench.

Position the Material Thickness Stop

Instructions for adjusting the material thickness stop to the desired setting on the jig.

Configure the Jig

Details on connecting the drill guides by inserting and sliding them together.

Operation Guide

Clamp the Jig and Drill Holes

Procedure for aligning, clamping the jig, and drilling pocket holes, avoiding chip ejection hole blockage.

Recommended Hole Spacing

Illustrates optimal pocket hole placement for 2x4, 2x6, and 2x8 lumber sizes.

Clamp the Joint in Place

Guidance on clamping workpieces for face joints and edge joints for a stable connection.

Drive the Screws

Steps for placing screws on the driver bit and driving them into pilot holes correctly.

Set-Up and Screw Length Chart

Provides a chart correlating material thickness, stop collar setting, and recommended screw length.

Helpful Tips

Using the Clamp Pad Adapter

Instructions on connecting the clamp pad adapter to the jig for secure clamping.

Specific Jig Applications

Using the Jig for Repair Applications

Demonstrates how to use the jig for making repairs on existing projects.

Using the Jig for Mitered Corners

Explains the process for drilling pocket holes at mitered corners on various lumber sizes.

Using the Jig for Railings

Maintenance and Support

Care and Cleaning

Basic instructions for cleaning the jig after use to maintain its condition.

Troubleshooting

Guidance on contacting support or checking FAQs for common issues.

Accessories

Lists and illustrates available accessories for the Kreg Pocket-Hole XL Jig.