Need help?Do you have a question about the Kreg Jig K5 and is the answer not in the manual?
General| Product Name | Kreg Jig K5 |
|---|---|
| Category | Power Tool |
| Type | Pocket Hole Jig |
| Material Support | Yes |
| Dust Collection | Yes |
| Storage | Yes, with storage wings |
| Material | Nylon, steel, glass-filled nylon |
| Thickness Settings | 1/2" to 1-1/2" |
| Drill Guide Compatibility | Kreg drill bits |
| Included Components | drill bit |
| Clamping Method | Over-center toggle clamp |
| Clamp Type | Over-center toggle clamp |
Adjusts the drill guide based on workpiece thickness for correct pocket hole positioning.
Guide to selecting the appropriate Kreg screw type (coarse/fine) based on material.
Sets the stop collar on the drill bit for precise drilling depth control.
Positions the clamp assembly to securely hold the workpiece for drilling.
Guides pocket hole placement on narrow workpieces (25-51mm wide).
Guides pocket hole placement on medium workpieces (51-76mm wide).
Guides pocket hole placement on wider workpieces (76-102mm wide).
Techniques for drilling pocket holes on mitered corners of workpieces.
Guidance on joining thin stock using specific screws and plugs.
To Next Page
