Kreg Jig K5 - Optional Accessories

www.kregtool.com
Optional Accessories
Available from your Kreg dealer or online at kregtool.com
Micro Pocket
™
Drill Guide
With a hole diameter 25% smaller than our standard pocket hole,
the Micro Pocket
™
Drill Guide lets you create compact pocket holes
in small projects, thin stock, and tight repair applications.
Kreg Jig
®
HD
Designed for use with 1
1
⁄2" (38mm)-thick and thicker framing material,
this heavy-duty system features #14 x 2 ½" (64mm) pocket screws.
6" Wood Project Clamp with Automaxx
®
Set the desired pressure and these 6" (152mm)-reach clamps
automatically adjust to materials up to 5" (127mm) thick.
Quick Change Kit
Switch from drilling pocket holes to driving pocket-hole screws in
seconds. The quick-change chuck installs in any three-jaw drill
chuck to accept standard ¼" (6mm) hex-shank bits.
Right-Angle Clamp with Automaxx
®
Slip the steel-pin jaw of this clamp into a pocket hole to clamp
workpieces together at a 90-degree angle. Then drive a screw into
an adjacent pocket hole.
Kreg System Organizer
Keepyourentirepocket-holeworkshopinthiscompact,ttedcase.
Accommodates K3, K4, or K5 pocket-hole jigs, Kreg clamps, Micro,
HD, and plug cutter drill-guide blocks, drill and driver bits, and an
assortment of pocket screws.
12