2
Safety Precautions
WARNING Before using an electric tool with this product, read and follow the tool manufacturer’s
instructions and safety precautions in addition to the safety precautions below to reduce risk of
serious injury from hazards such as re, electric shock, or rotating drill bit.
■ Always follow the written safety instructions for using your jig.
■ Follow your drill manufacturer’s safety guidelines.
■ Always wear personal protective equipment certied as such, including safety glasses,
hearing and respiratory protection. When using a power tool, always follow the manufacturer’s
personal protective equipment requirements.
■ The drill bit is sharp. Handle with care.
■ Do not attempt to hold the jig in place with your hand while drilling. Secure the jig in place
with a clamp.
■ Do not allow familiarity gained from frequent use of your tools to replace safe work practices.
A moment of carelessness is sufcient to cause severe injury.
WARNING Avoid awkward hand positions where a sudden slip could cause contact with the
rotating blade.
WARNING Do not operate this tool or any machinery while under the inuence of drugs, alcohol,
or medications.
WARNING This product can expose you to chemicals including Acrylonitrile and other chemicals,
which are known to the State of California to cause cancer and reproductive harm. For more
information go to www.P65Warnings.ca.gov.
WARNING Drilling, sawing, sanding, or machining wood products can expose you to wood
dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or
use a dust mask or other safeguards for personal protection. For more information go to www.
P65Warnings.ca.gov.
Table of Contents
Safety Precautions . . . . . . . . . . . . . 2
Pre-Assembly . . . . . . . . . . . . . . . . 3
Product Description . . . . . . . . . . . 3
Assembly . . . . . . . . . . . . . . . . . . 4
Operation . . . . . . . . . . . . . . . . . . 5
Recommended Hole Spacing . . . . . . 6
Set-Up and Screw Length Chart. . . . . 7
Tips . . . . . . . . . . . . . . . . . . . . . 8
Using the Clamp Pad Adapter . . . . . . 8
Using the Jig for Repair Applications . . 9
Using the Jig for Mitered Corners . . . . 9
Using the Jig for Railings. . . . . . . . . 10
Care and Cleaning . . . . . . . . . . . . . 11
Troubleshooting. . . . . . . . . . . . . . . 11
Accessories . . . . . . . . . . . . . . . . . 11
To Next Page
Loading...
