What to do if KRESS Lawn Mower MissionTM RTKn does not give an alarm when it is outside the Geo fence?
If your KRESS Lawn Mower, the MissionTM RTKn, doesn't give an alarm when outside the Geo fence, there are a couple of things to check. First, make sure the software is up to date. If that's not the issue, ensure the mower is powered on.
Why KRESS Lawn Mower MissionTM RTKn does not work after pressing the start button?
If your KRESS Lawn Mower, the MissionTM RTKn, won't start after pressing the start button, it could be due to a couple of reasons. First, check if the mower is within the designated working area. If it is, ensure it has a good positioning signal, indicated by a green light. Move it to an open area and wait for the green light before pressing start.
What to do if KRESS Lawn Mower runs out of power but does not return to charging base?
If your KRESS Lawn Mower, the MissionTM RTKn, runs out of power and doesn't return to the charging base, it might be because no virtual charging base is mapped. Rebuild the map and add the virtual charging base. Also, make sure the magnetic strip is longer than 8.2' (2.5 m).
What to do if KRESS Lawn Mower MissionTM RTKn is parked in the middle of the obstacle?
If your KRESS Lawn Mower, the MissionTM RTKn, is parked in the middle of an obstacle, it may be because the obstacles are too small for it to navigate out of. Designate the area where the MissionTM RTKn gets stuck as a No-Go zone. Alternatively, the mower's sensor may be malfunctioning. Check the sensor status on the diagnostic page of the app.
How to fix KRESS Lawn Mower MissionTM RTKn that cannot correctly dock with the charging base?
If your KRESS Lawn Mower, the MissionTM RTKn, can't correctly dock with the charging base, check the magnetic strip. When correctly placed, the green stripe of the magnetic strip should face away from the charging base.
Why KRESS Lawn Mower MissionTM RTKn is parked around the wall and cannot be started?
If your KRESS Lawn Mower, the MissionTM RTKn, is parked around the wall, won't start, and the positioning light is red, it might be in a shaded area for too long, triggering safety protection. Try to avoid mowing in areas with too much shade.
How to troubleshoot KRESS Lawn Mower when the LED light on the charging base does not turn on?
If the LED light on the charging base of your KRESS Lawn Mower does not turn on, ensure the charging base is properly connected to the charger and that the charger is connected to a working power supply.
General| Brand | KRESS |
|---|---|
| Model | MISSION KR161 |
| Category | Lawn Mower |
| Language | English |
Product may expose users to chemicals known to cause cancer or birth defects.
Read all safety warnings and instructions for safe operation.
Confirm virtual boundary and inspect the work area before operation.
Guidelines for operating the robotic lawnmower safely and correctly.
Safety warnings and guidelines for handling the battery pack.
Guidelines for transporting the machine and general recommendations.
Device compliance with FCC and Industry Canada regulations for wireless products.
Ensuring safe RF exposure distances for mobile devices during operation.
Explanation of various warning symbols used in the manual.
Information on proper disposal and recycling of batteries.
Detailed technical specifications for the KR161 robotic lawnmower.
Technical data for the antenna, including frequency bands and power.
Technical data for the 4G-GPS module, including GNSS bands.
List of accessories available for the KR161 robotic lawnmower.
Description of the garden product's intended use for domestic lawn mowing.
Instructions for safely replacing and maintaining the cutting blades.
Procedures for cleaning the machine's body and underside.
Information on battery life, charging, and winter hibernation.
Step-by-step guide for replacing the battery pack.
To Next Page
