Need help?Do you have a question about the KROHNE OPTIFLUX 5000 and is the answer not in the manual?
General| Device type | Electromagnetic flowmeter |
|---|---|
| Measuring principle | Electromagnetic |
| Operating pressure | Up to 40 bar |
| Accuracy | ±0.2% of the measured value |
| Lining material | PTFE |
| Electrode material | Stainless steel, Hastelloy, Tantalum, Titanium, Platinum |
| Housing material | Stainless steel |
| Approvals | ATEX, IECEx, FM, CSA |
| Communication | HART, PROFIBUS DP/PA, Modbus, Foundation Fieldbus |
| Power supply | 24 V DC |
| Ingress protection | IP68 |
| Output Signal | 4-20 mA |
| Process Connection | Flange |
| Process temperature | -40 °C to 150 °C |
| Material | Various materials available for wetted parts |
To Next Page
