3
• Do not install, operate or maintain this device without reading, understanding and following
the factory supplied handbook. Failure to do so, may result in injury or damage.
• Read these instructions carefully before starting installation and save them for future
reference.
• Observe all warnings and instructions marked on the device.
• You MUST only use a power supply that has a protective earth.
• Do not use the device with the covers removed!
• You MUST follow the installation instructions in the handbook, paying particular attention
to:
• Handling
• Lifting
• Supporting and fixing the meter
• Cabling and connections.
• If the product does not operate normally, refer to the handbook or consult a qualified
KROHNE service engineer. There are no operator-serviceable parts inside the product.
Explanation of Symbols Used
The following is a guide to the meaning of the symbols used in this handbook.The symbols fall
into two types. The rectangular symbols with blue background draw the reader’s attention to
general points of information. The triangular symbols with yellow background draw the read-
er’s attention to hazards or hazardous situations.
General Information
Information is important to the
installation/operation of the meter.
General Warning
Risk of damage to the meter or installation.
EX - Hazardous Area Warning
Instruction MUST be observed in order to
comply with Hazardous Areas Certification.
High Voltage
Risk of electric shock.
General Hazard
Non specific hazard that could result in injury.
Hot Surface or High Temperature
Risk of burning.
Heavy Item
Risk of injury.
MA_Haz_Areas_Rev_08_en.qxp 26/07/2012 16:20 Page 3
To Next Page
Loading...
Need help?
General
