IFD244, IFD258 · Edition 06.23
EN-12
14 LOGISTICS
Transport
Protect the unit from external forces (blows, shocks,
vibration).
Transport temperature: see page 11 (13 Technical
data).
Transport is subject to the ambient conditions
described.
Report any transport damage on the unit or packag-
ing without delay.
Check that the delivery is complete.
Storage
Storage temperature: see page 11 (13 Technical
data).
Storage is subject to the ambient conditions
described.
Storage time: 6months in the original packaging
before using for the first time. If stored for longer
than this, the overall service life will be reduced by
the corresponding amount of extra storage time.
15 CERTIFICATION
Declaration of conformity
We, the manufacturer, hereby declare that the prod-
ucts IFD244/258 comply with the requirements of
the listed Directives and Standards.
Directives:
– 2014/30/EU – EMC
– 2014/35/EU – LVD
Regulation:
– (EU) 2016/426 – GAR
Standards:
– EN298
The relevant product corresponds to the tested type
sample.
The production is subject to the surveillance proce-
dure pursuant to Regulation (EU) 2016/426 AnnexIII
paragraph3.
Elster GmbH
Scan of the Declaration of conformity (D,GB)– see
www.docuthek.com
CSA approved
Canadian Standards Association Class: 3335-01
and 3335-81 “Systems (Gas) - Automatic Ignition
and Components”, ANSI Z21.20 CAN/CSA-C22.2
No. 199-M89.
FM approved
Factory Mutual Research Class: 7611 “Combustion
Safeguards and Flame Sensing Systems”.
Designed for applications pursuant to NFPA 85 and
NFPA 86.
15.1 UKCA certified
Gas Appliances (Product Safety and Metrology etc.
(Amendment etc.) (EU Exit) Regulations 2019)
BS EN298:2012
BS EN14459:2007
15.2 Eurasian Customs Union
The products IFD244, IFD258 meet the technical
specifications of the Eurasian Customs Union.
15.3 RoHS compliant
Directive on the restriction of the use of haz-
ardous substances (RoHS) in China
Scan of the Disclosure Table China RoHS2– see
certificates at www.docuthek.com
16 DISPOSAL
Devices with electronic components:
WEEE Directive 2012/19/EU – Waste Electrical
and Electronic Equipment Directive
At the end of the product life (number of operat-
ing cycles reached), dispose of the packaging and
product in a corresponding recycling centre. Do not
dispose of the unit with the usual domestic refuse.
Do not burn the product.
On request, old units may be returned carriage paid
to the manufacturer in accordance with the relevant
waste legislation requirements.