Krone EasyCut F 320 M - Conversion for Mowing Steep Slopes

Special equipment
76
Pos: 33.3 /BA/Son derausstatung/ EasyCut / AM M ähwerke/Um bau für steiles B ergabmähen EC F 280 M / 320M / 360M @ 103\mo d_133225407 3902_78.docx @ 941818 @ 2 @ 1
14.3 Conversion for mowing steep slopes
(EasyCut F 280 M, EasyCut F 320 M, EasyCut 360 M)
EC-254-2
1
2
3
3
4
4
5
5
6
6
5
5
5
5
EasyCut F 280 M EasyCut F 320 M
EC F 360 M
5 5
Fig. 44
• Remove plates (1,2)
• Remove cover (3) of mower drum (4).
• Remove mower drum (4).
Note
Keep the plates (1,2), cover (3) and mower drums (4) in a protected place for later
reinstallation.
Warning - Cutting disc installed incorrectly
Effect: Damage to the machine
Make certain the cutter discs are installed correctly! The installed cutting discs (5) must be
installed at a 90-degree offset to the adjacent mower drums / cutting discs.