-A15-
6. Maintenance
Please take off the battery before doing maintenance.
Daily：
Use air gun to clean the area around Tensioning Wheel (H46-10700/H46-10710) and Gripper
(H46-10900) and the area around Cutter (H46-40900) daily. Be sure to use the air gun by
blowing the debris from the left side to avoid any debris blowing to inside of the tool.
If air gun could not dislodge the debris between the teeth of Tensioning Wheel
(H46-10700/H46-10710) , it is suggested to sharp the tip of PET (or other plastic) strap and use
it as a tool to clean the strap debris.
Please do not use any metal material or hard material to clean the teeth to avoid any damage to
the teeth.
To Next Page
Loading...
