Krups EA89Z CLASSIC EDITION - Other Functions

5352
ENGLISH
OTHER MAINTENANCE TASKS
MaintenanceMaintenance When?When? ExplanationExplanation Actions requiredActions required
Coee ushing
45 s - 30 ml
We recommended
you to rinse the coee
system daily or when
not used for a longer
period (more than 2
days).
Allows you to rinse the
machine’s coee circuit. This
process only uses hot water.
It ensures the authentic
taste of your coee and
guarantees that your
machine has a long life.
Place a container under the coee
nozzle
• Turn on your machine then press
• Choose the rinse function
• Press to begin rinsing.
Machine
Cleaning
13 min - 600 ml
When the machine
asks you.
To preserve coee avor
and for hygienic reasons, we
recommend you to clean
and degrease the machine.
It guarantees you optimal
preservation of the aromas
of your drinks.
Accessory required: 1 KRUPS cleaning
tablet (n°1) and a container with at
least 600ml capacity.
When the machine requests it, the white
or red white warning LED and the
LED on the interface will light up.
See chapter 10 "FULL AUTOMATIC
CLEANING OF THE MACHINE 3x / YEAR
- 13 MIN" of the quick start guide
You can also carry out cleaning when you
wish by pressing the
and choosing
the cleaning programme, indicated by
the LED
.
Descaling
20 min - 600 ml
The appliance noties
you when a descaling
program is necessary.
Descaling your machine
ensures its proper
functioning and eliminates
any deposit of limescale
or tartar This step is ery
important to ensure the
proper functioning and
longevity of your appliance.
Accessory required: 1 KRUPS
descaling sachet (n°3) and a
container with at least 600ml
capacity.
When it is necessary to run a descaling
programme, the appliance noties you.
When the machine starts up, the white
or red white warning
LED and the
LED on the interface will light
up. Next, see chapter 11“DESCALING
PROGRAM – 20 MIN” of the Quick
Start guide.
Once the function is active, you can also
begin descaling the machine on demand
by pressing
and selecting .
!
Important : You do not have to run the maintenance programme as soon as the appliance requests it, but you must do
it reasonably soon after. If the cleaning is postponed the alert will remain displayed as long as the operation
has not been performed.
!
Important : If you unplug your machine during maintenance or in the event of electrical failure, the cleaning
programme will resume from the start. It will not be possible to postpone this operation: it is mandatory
to rinse the water circuit. In this case a new cleaning tablet may be necessary.
OTHER FUNCTIONS
HOW TO ACCESS YOUR MACHINE’S SETTINGS
As this machine does not have a screen, the settings are integrated as a second function of certain buttons.
To access the settings menu:
• The appliance must be plugged in but not switched on
• Press
for 3 seconds
• When the LEDs under the rst three recipes blink and you hear a beep, you are in the settings. You can then navigate using
the ristretto, espresso and long coee buttons.
List of settings:
Coee temperature
Press
then to set the coee temperature. There are 3 temperature adjustment
levels for your coee drinks.
T1 :
T2 :
T3 :
Low
Medium
High
Auto OFF You can choose the length of time after which your selected appliance will automatically
turn o in order to optimise your energy consumption: 10 minutes, 20 minutes or
30minutes.
Press
then to adjust auto o.
10 min
20 min
30 min
Automatic rinsing
You can have your machine automatically carry out rinsing every time it is switched
on. The default setting is inactive. Press
then to set auto rinsing to ON.
Active
Inactive
To exit the settings menu:
• Press the
button to exit the menu.
• The machine will switch o and save the settings.