Krups KP 5002 - Removing Housing Front

R E P A I R
Removinghousingfront
4. Disconnectcableplug(E) ofcuplightingonfrontofmachine(twodifferentwiring
versionsdependingonmanufacturingdate).
5. Atthebackofmachine:
Pushhousingfront(F)tothefrontwithyourthumbs.Incaseofproblems open2
latchesoneachsideofhousingfront(F)withthehelpofascrewdriver.
6. Pushinhousingfrontatthetoptoloosen remaininglatch.
7. Removehousingfront.
Risk of damage if
cable plug is not
disconnected.
The water tank
connector and the
cup lighting can be
replaced now with this
partial disassembly.