Krups KP 5002 - Page 32

R E P A I R
16. Useanobsoleteplasticcard(orascrewdriverwiththeutmostcare)torelease4
snapconnectionsatthefro ntsideofcenterpart.
17. R emovehousingleft(H)alittlebitfromcenterparttogainaccesstoPCBassembly
(I).
18. Attheinsideofhousingleft:Release4hook sbyhandsuccessiv elyanddetach
smallPCB(partofPCBassembly ).
Do not stress con-
necting cable of
PCB assembly (I).