To Next PageTo Next PageWhy can't I close the door of my Krups VB650E SUB?
If you cannot close the door of your Krups Kitchen Appliances SUB, it is likely that THE TORP is not inserted completely. Ensure that you fully insert THE TORP into THE SUB.
How to close the tap cover of Krups VB650E Kitchen Appliances SUB?
If you cannot close the tap cover on your Krups Kitchen Appliances SUB, the tube spout is likely not inserted correctly. Remove the tube spout and refit it, following the instructions in the chapter "Installing THE TORP in THE SUB".
How to fix a Krups VB650E Kitchen Appliances SUB that won't turn on?
If your Krups Kitchen Appliances SUB isn't turning on, first, make sure it's properly plugged into the nearest electric socket. If it still doesn't turn on, the electronic board may be defective, and you should contact Krups customer service.
Why is there ice in my Krups Kitchen Appliances SUB cooling chamber?
If you find ice in the cooling chamber of your Krups Kitchen Appliances SUB, it could be due to several reasons. The room temperature might be too low (below 53.6°F), so install THE SUB in a more suitable environment. It's also possible that THE SUB has been running for too long without a TORP inside; remove the ice with a warm sponge and load a TORP into the chamber. If these steps don't resolve the issue, and the beer isn't cold enough, wait until the temperature indicator turns green before serving. If the problem persists, the temperature regulation may be defective, and you should contact Krups customer service.
General| Model | VB650E |
|---|---|
| Color | Black |
| Power | 1450 W |
| Pump Pressure | 15 bar |
| Tap system | Manual |
| Voltage | 220-240 V |
