7 Maintenance
32 of 44
4STQ
2580.821/04-EN
7 Maintenance
7.1 Maintenance/inspection
WARNING
Hazardous lubricants
Hazardous to persons and the environment!
▷ When filling in the lubricant take appropriate measures to protect persons and
the environment.
▷ Observe all legal regulations on handling fluids posing a health hazard.
NOTE
The operator is responsible for conducting checks.
NOTE
Observe the intervals given in the operating manual of the pumps.
▪ The mechanical seal is low in maintenance. Replace wear parts as necessary.
▪ Proper operation includes regular checks of the temperature and leakage
(drainage) and of the mechanical seal's quench liquid pressure and fill level.
▪ When a system maintenance inspection or pump maintenance inspection is
conducted, the mechanical seal should also be inspected. The seal faces should be
reworked and all elastomer joint rings and springs should be replaced by new
ones. KSB is available for inspecting the mechanical seal.
To Next Page
Loading...
Need help?
General