1 General
5 of 44
4STQ
2580.821/04-EN
1 General
1.1 Principles
This operating manual is valid for the type series and variants indicated on the front
cover.
The operating manual describes the proper and safe use of this equipment in all
phases of operation.
The order number and order item number of the pump clearly identify the
mechanical seal via the corresponding material number in the pump's parts list and
serve as identification for all further business processes.
In the event of damage, immediately contact your nearest KSB Service centre to
maintain the right to claim under warranty.
For any queries: contact.ksbglrd@ksb.com
1.2 Target group
This operating manual is aimed at the target group of trained and qualified specialist
technical personnel.
1.3 Other applicable documents
Table1: Overview of other applicable documents
Document Contents
Data sheet Description of the technical data of the pump (set)
in which the mechanical seal is installed.
General assembly drawing
1)
Description of the mechanical seal as part of the
sectional drawing of the pump
Sub-supplier product literature
1)
Operating manuals and other product literature
describing accessories and integrated machinery
components
For accessories and/or integrated machinery components, observe the relevant
manufacturer's product literature.
1.4 Symbols
Table2: Symbols used in this manual
Symbol Description
✓ Conditions which need to be fulfilled before proceeding with the
step-by-step instructions
⊳ Safety instructions
⇨
Result of an action
⇨ Cross-references
1.
2.
Step-by-step instructions
Note
Recommendations and important information on how to handle
the product
1) If agreed to be included in the scope of supply
To Next Page
Loading...
Need help?
General