KSB Controlmatic E.2 - 10 EU Declaration of Conformity

10 EU Declaration of Conformity
21 of 24
Controlmatic E.2
10 EU Declaration of Conformity
Manufacturer: KSB SE & Co. KGaA
Johann-Klein-Straße 9
67227 Frankenthal (Germany)
The manufacturer herewith declares that the product:
Controlmatic E.2
Series code range: 2016w16 to 2018w52
▪ is in conformity with the provisions of the following Directives as amended from time to time:
– Electromagnetic Compatibility Directive 2014/30/EU
– Low-voltage Directive 2014/35/EU
The manufacturer also declares that:
▪ The following harmonised international standards have been applied:
– EN 60730-1, EN 60730-2
– EN 61000-6-1, EN 61000-6-3
The EU Declaration of Conformity was issued in/on:
Frankenthal, 1 February 2018
Joachim Schullerer
Head of Product Development Pump Systems and Drives
KSB SE & Co. KGaA
Johann-Klein-Straße 9
67227 Frankenthal