KSB Controlmatic E.2 - Product Description and Features; Name Plate Information; Detailed Design Features

4 Description
9 of 24
Controlmatic E.2
4 Description
4.1 General description
▪ Automatic control unit for automatically starting and stopping a pump
4.2 Designation
Example: Controlmatic E.2
Table6: Designation key
Code Description
Controlmatic Type series
E Single-phase alternating current
.2 Product version
4.3 Name plate
S131630
Ident. Nr . 39300031
1~220-240 V
50/60Hz-10(6) A
T.max:60ºC-IP 65
P. max: 10 bar
Q. max: 10m ³/h
made in EU
1
2
3
4
5
6
7
Johann-Klein-Straße 9
Deutschland
67227 Frankenthal
KSB SE & Co. KGaA
Fig.1: Name plate (example)
1 S serial number, 13 device version,
16 year of construction 2016, 30
calendar week
2 Mat. number
3 Control voltage 4 Frequency, max. amperage
5 Max. fluid temperature, enclosure 6 Max. operating pressure
7 Max. flow rate
4.4 Design details
Design
▪ Automatic control unit
▪ Pressure-dependent starting and flow-dependent stopping of the pump
▪ IP44 enclosure
▪ 1~230VAC, 50/60Hz
▪ 1.5m power cable with shockproof plug
▪ Integrated dry running protection
▪ Integrated check valve