To Next PageTo Next Page
Need help?Do you have a question about the KStar BluE-10KT-M1 and is the answer not in the manual?
General| Model | BluE-10KT-M1 |
|---|---|
| Rated Power | 10 kW |
| Max. DC Input Voltage | 1000 V |
| Start Voltage | 200 V |
| Number of MPPT Trackers | 2 |
| Number of DC Inputs | 4 |
| Rated Output Voltage | 230V |
| AC Voltage Range | 180-280V |
| Rated Grid Frequency | 50/60 Hz |
| Total Harmonic Distortion (THDi) | <3% |
| Power Factor | >0.99 |
| DC Switch | Yes |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Cooling | Natural Convection |
| Communication | RS485, Wi-Fi (optional) |
| Efficiency | 98.6% |
| Max. AC Output Power | 11 kW |
| Operating Temperature Range | -25°C to 60°C |
| Protection Features | Overcurrent Protection, Overvoltage Protection, AC Short-Circuit Protection |
| Operating Temperature | -25°C to 60°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 0-100% |
| Dimensions | 540*380*170mm |
Details the three-phase photovoltaic grid-connected inverter, its function, and design.
Explains various safety symbols used in the manual for potential risks.
Provides general safety guidelines for connecting devices and handling electrical safety.
Outlines specific conditions and guidelines for using the inverter safely and correctly.
Detailed instructions for connecting the PV input to the inverter.
Procedures for connecting the AC output of the inverter to the grid.
Guidance on establishing a proper external ground connection for the inverter.
Information on selecting appropriate over-current protection devices for the inverter.
Step-by-step instructions on how to safely start the inverter.
Step-by-step instructions on how to safely stop the inverter.
Lists common alarm messages, failure descriptions, and their solutions.
