To Next PageTo Next Page
Need help?Do you have a question about the KStar KSH-5k-48 and is the answer not in the manual?
General| Model | KSH-5k-48 |
|---|---|
| Rated Power | 5000 W |
| Input Voltage | 48 V |
| Output Voltage | 230 V |
| Output Frequency | 50/60 Hz |
| Efficiency | >90% |
| Protection Degree | IP65 |
| Input Voltage Range | 40-60 V |
| Output Waveform | Pure Sine Wave |
| Rated AC Power | 5000 W |
| Communication | RS485 |
| Protection Features | Over Temperature Protection |
| MPPT Voltage Range | 120-450 V |
Provides guidance on selecting an appropriate location for inverter installation.
Instructions for physically mounting the inverter onto a wall.
Step-by-step guide for connecting the AC power cable to the inverter.
Instructions for connecting the photovoltaic (PV) input cables to the inverter.
Detailed steps for safely connecting the battery to the inverter.
Instructions for connecting the external Current Transformer (CT).
Lists alarm and error codes for troubleshooting.
Details user interface access and password entry for settings.
Interface for accessing various system information and settings.
Interface for selecting and configuring battery-related parameters.
Selects the appropriate grid connection standard based on location.
Configures various operational parameters like reactive power and grid settings.
Allows changing the password for accessing settings.
Resets the inverter to its factory default configuration.
Lists and explains various alarm codes for system status.
Lists and explains various error codes for troubleshooting.
Provides a table of common faults, their codes, and solutions.
Details specifications for DC input parameters like voltage and current.
Lists specifications for AC output parameters like power and voltage.
Specifies battery voltage range, charge/discharge power, and current.
Lists protection features like isolation, earth-fault, and reverse polarity.
Details grid voltage and frequency ranges for various countries.
