KStar KSH-5k-48 - Factory Default Setting

33
Interface Description
Maintainer use only.
8.2.13Factory default setting
Interface Description
Press UP/DOWN buttonto move
corresponding options;
Press Enter to enter the selected item.
8.3 Inquiry
Interface Description
Press UP/DOWN button to move
corresponding options;
Press Enter button to jump to the selected
menu;
Press ESC button to return to user
interface (refer to 8.1.16);
There are four alternative options:
machine model
，
serialnumber
，
firmware
version and running records (refer to
1to4).
Machine model①
Interface Description
This interface displays machine model of
the inverter;
Press ESC button to return to inquiry
interface.
② Serial number
Interface Description
This interface displays serial number of
the inverter;
Press ESC button to return to inquiry
interface.
③
Firmware Version
Interface Description
→12:MAINTENANCE
-FACTORY RESET-
→1： CANCEL
2： CONFIRM
--INQUIRE--
→1: INV MODULE
2：MODULE SN
3：FIRMWARE
4：RECORD
--INVERTER--
KSE-5K-TL
--INVERTER--
SN：
123456789532625