Need help?Do you have a question about the KStar KSG-40KT-M1 and is the answer not in the manual?
General| Model | KSG-40KT-M1 |
|---|---|
| Category | Inverter |
| Rated Power | 40kW |
| Output Frequency | 50Hz / 60Hz |
| Operating Temperature | -25°C to +60°C |
| Storage Temperature | -40°C to +70°C |
| Altitude | ≤ 2000 m |
| Output Voltage | 400V |
| Efficiency | ≥ 95% |
| Input Voltage | 320V-800V |
| Protection Features | Over voltage, under voltage, over current, short circuit, over temperature |
| Humidity | 0% to 95% (non-condensing) |
Describes the new generation of household three-phase series photovoltaic grid connected inverter.
Explains safety symbols used in the manual, highlighting potential risks and important information.
Provides crucial safety instructions for installation, maintenance, and operation to prevent hazards.
Details the process and requirements for securely mounting the inverter, including bracket installation and clearance.
Provides comprehensive instructions for making all necessary electrical connections to the inverter.
Explains the steps for connecting the photovoltaic (PV) input to the inverter, including polarity and voltage checks.
Provides instructions for connecting the AC output to the grid, including cable preparation and terminal connections.
Details the procedure for making the external ground connection to the inverter.
Recommends OCPD ratings for protecting the inverter's PV and AC circuits against overcurrent.
Provides step-by-step instructions for safely starting up the inverter, including AC and DC switch operations.
Outlines the correct procedure for shutting down the inverter, emphasizing the order of AC and DC switch operations.
To Next Page
