Need help?Do you have a question about the KStar KSG Series and is the answer not in the manual?
General| Cooling Method | Smart Cooling |
|---|---|
| Nominal AC Voltage | 220V/230V/240V |
| AC Voltage Range | 180Vac~280Vac |
| Nominal Frequency | 50Hz/60Hz |
| THDI | <3% |
| Power Factor | >0.99 |
| DC Connection Type | MC4 |
| AC Connection Type | Terminal Block |
| Protection Degree | IP65 |
| Operating Temperature Range | -25~+60°C |
| Protection Features | DC Reverse-Polarity Protection, AC Short-Circuit Protection, Output Over Current Protection, Over Voltage Protection, Over Temperature Protection, Insulation Monitoring Protection, Ground Fault Monitoring Protection, Anti-Islanding Protection |
| Operating Temperature | -25~+60°C |
| Humidity | 0~100% |
| Altitude | 4000m |
Describes the new generation of household three-phase photovoltaic grid connected inverter.
Instructions for checking the inverter and accessories after opening the package.
Lists the parts included when receiving the inverter.
Lists optional accessories included in packaging.
Guidelines for proper storage of the inverter to maintain its condition.
Explains safety symbols used in the manual to highlight potential risks and information.
Provides crucial safety guidelines for installation and operation of the inverter.
Specifies conditions and requirements for using the inverter safely and correctly.
Describes the optional LCD display on the inverter's front panel.
Explains the meaning of different LED status indicator lights on the inverter.
Details the function of the four keys on the inverter's front panel.
Lists the information displayed on the inverter's four-line Liquid Crystal Display.
Provides criteria for choosing an appropriate installation location for the inverter.
Details the process and considerations for physically mounting the inverter.
Explains how to connect the photovoltaic (PV) array to the inverter.
Details the procedure for connecting the inverter to the AC grid.
Instructions for establishing the external ground connection for the inverter.
Specifies recommended overcurrent protection device ratings for inverter circuits.
Explains how to connect the inverter for monitoring via Wi-Fi or GPRS.
Details how to connect a meter to the inverter for specific functions.
Describes how to connect the DRED port for demand response functionality.
Step-by-step guide on how to properly start up the inverter.
Step-by-step guide on how to safely shut down the inverter.
Describes the initial interface displayed after the inverter starts up.
Explains the circulating menu mode for displaying inverter information.
Details how to navigate the user interface for settings and inquiries.
Explains how to access and navigate the inverter's setup and configuration menus.
How to configure the inverter's input mode (independent or parallel).
How to set the grid standard based on country or region.
How to enable or disable remote control functionality.
Overview of various working parameters that can be configured.
Setting the RS485 communication address.
Setting the baud rate for RS485 communication.
Selecting the communication protocol for RS485.
Changing the display language of the inverter interface.
Adjusting the LCD backlight time.
Setting the inverter's date and time.
Clearing historical records from the inverter.
Changing the password for accessing setup menus.
Accessing the maintenance interface for factory testing.
Resetting inverter parameters to default factory settings.
Configuring and enabling array detection features.
Enabling or disabling array detection.
Setting the threshold for array detection.
Configuring settings for three-phase system wiring.
Accessing various inquiry menus for inverter information.
Displaying the inverter model information.
Displaying the inverter's serial number.
Displaying the firmware version of the inverter.
Displaying recorded fault and warning alarms.
Displaying details of specific error events.
Accessing statistics related to inverter operation.
Displaying operational time and generating duration statistics.
Displaying the number of times the inverter has been paralleled.
Displaying historical and today's peak power values.
Displaying the energy generated by the inverter on a daily basis.
Displaying the energy generated by the inverter on a weekly basis.
Displaying the energy generated by the inverter on a monthly basis.
Displaying the energy generated by the inverter on a yearly basis.
Displaying the total gross energy generated by the inverter.
Detailed technical specifications for the KSG-25KT-M1 model.
Detailed technical specifications for the KSG-30KT-M1 model.
Detailed technical specifications for the KSG-33KT-M1 model.
Detailed technical specifications for the KSG-36KT-M1 model.
Detailed technical specifications for the KSG-40KT-M1 model.
Lists the built-in protection devices and safety features of the inverter.
Details additional functionalities like anti-reflux and PID recovery.
Information on safety regulations and certifications for the inverter.
To Next Page
