KStar KSH-5k-48 - Battery Parameters; Battery Type

25
⑥ Input mode
Interface Description
Setup of PV Input mode.
The factory setting by default is
standalone mode.
When parallel input is set to be
stand-alone mode, PV power will be
imbalanced.
8.2.2 Battery parameters
Interface Description
This interface is used to select battery
parameters.
Press UP/DOWN button to move
corresponding options;
Press ENTER button to enter the selected
menu;
Press ESC button to return to setting
interface (refer to 8.3.1).
（
see from ① to ⑥
）
① Battery type
Interface Description
This interface is used to select battery
type.
Press UP/DOWN button to move
corresponding options;
Press ENTER button to enter the selected
menu;
Select the lead acid ENTER button to enter
the battery capacity interface;
Options include Common Lib, Pylon Lib,
Vision Lib , Common Lead-acid and
DC source.
Battery capacity
Interface Description
--INPUT MODE --
→1:INDEPENDANT
2：PARALLEL
3: CV
--BAT SETTING--
→1:BAT TYPE
2:
BAT END VOLT
3:BAT OVP
4:DISC-DEPTH
5:CHARG-VOLT
6:CHARGE-CURR
--BAT TYPE--
1:COMMON_Li
→2:PYLON_Li
3:VISION_Li
4: LEAD-ACID
5:DC_SOURCE