EasyManua.ls Logo

KStar GP800 - 9 Specification

KStar GP800
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATION GP800 UPS
- 34 -
9 SPECIFICATION
Model 1KVA 2KVA 3KVA 4KVA 6KVA 8KVA 10KVA
AC input
Voltage 176~264VAC
Frequency 50(60) Hz ±5%
Phase Single
Max. Current 6A 10A 14A 24A 34A 45A 56A
AC output
Voltage 220V(230V)
Frequency 50(60) Hz
Voltage
stability
±1%
Frequency
stability
±0.5 (Disconnection)
Wave form SPWM sine wave
Power factor 0.8
Distortion <3%(linear load)
Battery
Voltage 48VDC 192VDC
Model Lead acid free from maintenance,
Offer time Refer to figure 31
Charging
time
90% capacity after 8-10 hours
Alarm
Utility
disconnect
Buzzer beeps once every four seconds
Battery
exhausted
Buzzer beeps once every one second
Overload Load indicator light is solid on, buzzer continuously beeps for long-time.
UPS
abnormal
Fault indicator light is solid on, buzzer continuously beeps for long-time.

Related product manuals