13 WHEELS, TIRES 107
13.1 Removing the front wheel
Preparatory work
– Raise the motorcycle with the rear wheel stand. ( p. 77)
– Raise the motorcycle with the front wheel stand. ( p. 78)
B00743-10
Main work
(Option: Without ABS)
–
Loosen screw
by several rotations.
–
Release screws
.
–
Press on screw
to push the wheel spindle out of the axle clamp.
–
Remove screw
.
Warning
Danger of accidents Reduced braking effect caused by damaged brake
discs.
– Always lay the wheel down in such a way that the brake discs are not
damaged.
– Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
fork.
Info
Do not pull the hand brake lever when the front wheel is removed.
To Next Page
Loading...
Need help?
General
